This user hasn't shared any biographical information

Homepage: https://haukcode.wordpress.com

Receive NRF24 traffic with TI CC2543/CC2544


This article describes how to configure a Texas Instruments CC2543 or CC2544 radio to receive traffic from a NRF24L01+ chipset.


  • TI CC2543/CC2544 development kit
  • 2x Arduino Uno
  • 2x Nordic Semiconductor NRF24L01+ from Amazon
  • Example code running on Arduino to send a known packet between two NRF24s.

Set up

I used the RF24 library and the included sample to send a known packet between two NRF24L01 nodes. The sample code is linked above. I basically configure it on the network address, address with, data rate as I want to mimic on the TI chips, then send a 10 byte packet with data that’s easy to find in a bitstream (0x55, 0xAA, will be alternating 010101010) since we may not capture the data aligned exactly on a byte level.

Once I had the two NRF24 nodes communicating I set up the CC2543-CC2544 DK with the SmartRF Studio 7 under Packet RX.

SmartRF Studio 7

The key to get it to capture the NRF24 traffic is in all the register settings, to make it behave like the NRF24 when it comes to sync words, packet format, etc. I’ll list out all the registry settings that are relevant here.

Read the rest of this entry »


Leave a comment

How to create a signed Windows 8 driver for USB Ir Toy

As part of a home automation project I’ve been testing different infrared receivers/transmitters. One inexpensive USB-based transceiver is the Usb Infrared Toy (v2): http://dangerousprototypes.com/docs/USB_Infrared_Toy

This uses the Microchip PIC 18F2550 microcontroller which acts as a virtual USB serial port. The problem is that the included driver isn’t signed so it can’t be used in Windows 8.x. Various people have suggested to disable signature checking in Windows, but that’s both risky and complicated. I wanted to go the proper route instead, which is to sign the driver with a certificate. A real certificate is about $180/year (code signing certificate) and I didn’t wan to pay that, so the alternative is to use a self-created certificate and ask Windows to trust that (which is a normal Windows process, doesn’t require a diagnostic boot, etc). I wanted to document the steps so it can be reproduced as well for other drivers.

Get the driver inf-file in order

First step was to clone the repository so I can commit my changes. The creators of Usb Ir Toy are currently using code.google and have all their projects in one repository. Since code.google is going away and to make it easier to work on this project I copied out the Usb Ir Toy folder and put it up on github instead, here: https://github.com/HakanL/UsbIrToy. The next task was to update the inf-file so it would be compatible with Windows 8.x and go through the signature check (using inf2cat). I took the latest Microchip example driver inf file (http://www.microchip.com/pagehandler/en-us/devtools/mla/home.html) and just copied the relevant settings over. Note that for devices like these (that emulate a serial port) the “driver package” doesn’t actually include the driver, it just consists of an inf-file that describes the device and then it references the built-in usbser driver that’s included with Windows. But you still have to sign the inf-file so Windows can trust it. Here’s the updated inf-file: https://github.com/HakanL/UsbIrToy/blob/master/inf-driver/mchpcdc.inf. And to generate the cat-file from the inf file I used the command tool inf2cat from the Windows Device Driver kit (https://msdn.microsoft.com/en-us/windows/hardware/gg454513#drivers) using the instructions from here https://msdn.microsoft.com/en-us/library/windows/hardware/ff547089(v=vs.85).aspx to come up with this command line:

Inf2Cat.exe /driver:. /os:6_3_X86,6_3_X64,Server6_3_X64,8_X64,8_X86,Server8_X64,Server2008R2_X64,7_X64,7_X86,Server2008_X64,Server2008_X86,Vista_X64,Vista_X86,Server2003_X64,Server2003_X86,XP_X64,XP_X86,2000

Note that the /driver parameter is pointing to the directory where the inf file is, not the file itself. I used . since I was already in that folder. This command runs some signability tests and then outputs the cat-file. From there you need to sign that file before it’s ready to used as a device driver.

Read the rest of this entry »

, ,


Hacking the Harmony RF Remote


For my home automation system I’ve been looking for a sleek universal remote. Some of the requirements are:

  • RF (my A/V cabinet is in the garage)
  • Great ergonomics
  • Inexpensive (<$100)
  • Not too many buttons
  • Use regular batteries so I don’t have to put it back in a charging station after use
  • High WAF (Wife Approval Factor)
  • Ability to integrate it to my DIY home automation system

I finally found it, the Logitech Harmony which is part of their Ultimate package ($130+), but you can buy it as an add-on for $30 (http://www.amazon.com/Logitech-Harmony-Companion-Ultimate-915-000245/dp/B00LTKGFDQ). After some research I figured out that it’s using the popular NRF24LE1 chip (NRF24L01+ radio plus a 8051 MCU). That is totally hackable!

My ultimate goal is to attach a cheap NRF24L01+ chip (http://www.amazon.com/nRF24L01-Wireless-Transceiver-Arduino-Compatible/dp/B00E594ZX0) to my home automation system (based on Raspberry Pi) and use this remote to control my A/V equipment.

I figured there are two phases to this goal, phase one is to determine the RF protocol and ids used to send packets between remote and hub. Phase two would be to understand the packet protocol and see if there are any software-based frequency hopping, encryption, etc.

Read the rest of this entry »

, ,


High Precision Timer in .NET/C#

Here’s a high-precision timer I wrote. I get roughly <1ms avg precision on 25ms interval. But if Windows is busy it may come in late. It’s fairly lean on CPU utilization. Feel free to use. It uses Sleep(1) when the next tick is more than 15ms away and then SpinUntil (which yields as needed) to keep CPU usage at bay. Uses .NET4 features.

, , , , , ,

Leave a comment

Something for next science fair project

4 channel USB data logger. They are even giving away free loggers for 4th graders and up.

Leave a comment

Video of the Halloween display

Not great quality, it’s hard to shoot in the dark, with fog. But hopefully you’ll see some details of the display. We had a blast last night with a lot of kids (and adults) enjoying it! Many screaming, some crying 🙂

, ,

Leave a comment

DIY Pressure Mat

Just a picture of the pressure-sensitive mat I created for halloween. It’s placed in the stairs leading to our porch. When visitors step on it it triggers the main sequence. I pretty much followed the instructions on this link: http://supersoda.com/detail.php?id=00000000036). It seems flaky with just the cardboard keeping the distance between the foil, but it’s actually working very well.


Leave a comment